Scantool Diagnostics

Adaptive Front Lighting System
B1102 Battery Voltage Low - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. Turn "ON" Engine and headlamp and defogger S/W.
3. Monitor the "Supply voltage" parameters on the GDS.
4. Keep the 2500 Engine rpm for 2 minutes and then confirm the output value.

Specification :Approx. 10.5 ≤ Vbatt ≤ 16




FIg.1) Engine "ON", 2500rpm status after starting - AFLS Current Data(Supply Voltage).
5. Is parameter displayed within specifications?