Scantool Diagnostics

Adaptive Front Lighting System
B1307 Air suspension ECU sensor signal invalid - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. Engine "ON" and Head lamp"ON"
3. Monitor the "Sensor angle front, Sensor angle rear" parameters on the GDS.(AFLS and ECS's current data).

Specification :below -128 ~ +125 mm








FIg.1) Engine "ON" - AFLS's current data(Sensor angle front and Sensor angle rear).
FIg.2) Engine "ON" - ECS's current data(Height Level signal).
4. Is parameter displayed within specifications?