Component Inspection

Electronic Stability Control
C1353 Pressure sensor (Wh1) - electrical - Inspection/Repair:_:Component Inspection

Component Inspection

1. IG "OFF"
2. IG "ON"
3. After connecting GDS, check DTC on the GDS.
4. Using GDS, Erase the DTCs.
5. Check if the pressure sensor's service data shows '0 bar' on the GDS while not pressing the brake pedal.
6. Check if the pressure sensor's service data rises on the scantool while pressing the brake pedal.
7. Is the pressure sensor's data unusually shown?