Component Inspection

Electronic Stability Control
C1356 Pressure sensor (Wh2) - other - Inspection/Repair:_:Component Inspection

Component Inspection

1. IG "OFF"
2. IG "ON"
3. After connecting GDS, check DTC on the scantool.
4. Using GDS, Erase the DTCs.
5. Check if the pressure sensor's service data shows '0 bar' on the GDS while not pressing the brake pedal.
6. Check if the pressure sensor's service data rises on the GDS while pressing the brake pedal.
7. Is the pressure sensor's data unusually shown?