Component Inspection

Lane Depature Warning System
C1362 Camera Signal Failure - Inspection/Repair:_:Component Inspection

Component Inspection

1. Check LDWS lens' vision field.
- This fault may be caused by being contaminated by a foreign material in the lens' vision field.
- If the lens is dirty, clean it.
2. Using a scantool, Clear DTC.
3. Let LDWS system turn OFF, and then turn it ON, again.
4. Drive the vehicle at the speed of over 20Km/h for over 1 minute.
5. Using a scantool, Check DTC present.
6. Are any DTCs present ?