Component Inspection

Electronic Stability Control
C1513 Brake switch error - Inspection/Repair:_:Component Inspection

Component Inspection

Check brake light switch
1. IG "OFF"
2. Disconnect brake light switch connector.
3. Measure resistance between both ends of the brake light switch connector.

Specification :
Resistance between both ends of the Brake Light Swich(A)
- 0Ohms (when the brake light switch is pressed) InfinityOhms (when the brake light switch is released)
Resistance between both ends of the Brake Switch(B)
- InfinityOhms (when the brake light switch is pressed) 0Ohms (when the brake light switch is released)








4. Is the measured value within specifications?