Scantool Diagnostics

Intelligent Accel Pedal
C1538 ECO Pedal Switch Stuck - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. IG KEY " ON " or Engine " ON ".
3. Monitor the " ECO-P switch" parametre on the GDS
4. repeats a using a GDS Eco-P switch on/off, check the sensor output

Specification :ON/OFF change to use of Eco-P switch




Fig.1) ECO-P switch ON
5. Is parameter within specigications?