Scantool Diagnostics

Electronic Stability Control
C2328 Rear-LH Valve error (Outlet Valve) - Scantool Diagnostics

Check actuation test

1. Connect GDS to Data Link Connector(DLC)
2. IG "ON"
3. Select the "Actuation Test" mode on the GDS.
4. Monitor the operating status of the valve by Actuation Test of GDSl.

Specification :If the operating sound is heard, it works okay.




Fig.1) Test Condition : Ignition "ON" & Engine "OFF".
5. Does the valve operate normally?