W/Harness Inspection

Engine Control
P0282 Cylinder 8 Injector Circuit Low - Inspection/Repair:_:W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






Control Circuit Inspection

Check Short in control circuit
1. IG KEY "OFF".
2. Disconnect injector connector and IDB connector.
3. Measure the resistance between control terminal of injector harness connector and chassis ground.

Specification :Infinite




4. Is the measured resistance within specification ?