Scantool Diagnostics

Automatic Transaxle
P0717 Input/Turbine Speed Sensor - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. Ignition "ON" & Engine "ON".
3. Selet "Currnet Data"mode and monitor "Input speed sensor" parameter.
4. Driving above 20 Km/h.

Specification :Increasing Gradually












































Fig 1) "P" range
Fig 2) "R" range
Fig 3) "N" range
Fig 4) "D" range 1st
Fig 5) "D" range 2nd
Fig 6) "D" range 3rd
Fig 7) "D" range 4th
Fig 8) "D" range 5th
Fig 9) "D" range 6th
FIG 10)"D" range 7th
FIG 11)"D" range 8th
5. Is measured "Input speed sensor" value within specification?