Component Inspection

Automatic Transaxle
P0722 Output Speed Sensor Circuit No Signal - Inspection/Repair:_:Component Inspection

Component Inspection

1. Ignition off & Engine Off.
2. Disconnect "ATM solenoid valve connector.
3. Connect GDS to Data Link Connector(DLC) and select Simulation mode.
4. Input specification frequency to signal of Output speed sensor by simulation mode.








Fig 1) Output 200Hz -> 198rpm
Fig 2) OOutput 300Hz -> 298rpm
** The values are subject to change according to vehicle model or conditions.
5. Is measured Output speed sensor value changed by Output frequency?