Rear Door Panel: Service and Repair

Replacement

Door Trim Replacement

NOTE:
- Be careful not to scratch the door trim and other parts.
- Put on gloves to protect your hands.

1. Detach the clip, then remove the frame inner cover (A).




2. Remove the full handle cap (A).




3. Remove the inside handle cover (B).
4. Loosen the door trim (A) mounting screws, Release the clips that hold the door trim.




5. Push the hook, then remove the inside handle cable cage (A).




6. Disconnect the power window connector (A), then remove the door trim.




7. Installation is the reverse of removal.

NOTE:
- Make sure connectors are connected properly and each rod is connected securely.
- Make sure the door lock and opens properly.
- Replace ant damaged clips.