Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2012 >> Equus V8-5.0L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag >> Service and Repair >> Removal and Replacement >> Knee Airbag (KAB) Module >> Repair Procedures

Repair Procedures





Removal

1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2. Remove the crash pad lower panel. .
3. Disconnect the knee airbag harness connector.




4. After loosening the mounting bolts (3EA) and nuts (3EA) remove the knee airbag.






Installation

1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable and wait for at least three minutes.
3. Tighten the knee airbag mounting bolts (3EA) and nuts (3EA).

Tightening torque:
5.4 - 6.4 N.m (0.55 - 0.66 kgf.m, 4.0 - 4.8 lb-ft)

4. Connect the knee airbag connector.
5. Install the crash pad lower panel.
6. Install the crash pad side cover.
7. Reconnect the battery negative cable.
8. After installing the knee airbag (KAB), confirm proper system operation:
A. Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
pro multis · About Operation CHARM