Components And Components Location

Components





Main Function
1. Full Retraction
Maintain more safe posture by strongly rewinding the seat belt right before crash.
[Operation Condition]
A. When sudden braking
B. When vehicle control function is disabled
2. Dynamic Support
Stabilize the driver from toward and centrifugal force by rewinding the seat belt during sudden braking or turning.
[Operation Condition]
A. When sudden braking (Forward force)
B. When sudden turning (Centrifugal force)
C. When sliding in icy road
3. Haptic Warning
Warn the driver with seat belt vibration when the vehicle gets out of its lane or any other dangerous situation.
[Operation Condition]
A. When detecting getting out of the lane by LDWS
4. Seat Belt Parking
In 3 seconds after releasing the belt, it returns the seat belt position by winding the belt. But, this function doesn't work when the belt returns to its original position.

Pre-safety Seat Belt Warning Lamp
The pre-safety seat belt warning lamp located in the middle of the cluster is for informing that there is any fault in this system.
When IG ON, it is normal if the lamp is turned on for 3 seconds, and then off. But there may be any faulty if it is on the cases below.
1) When IG ON, it is continuously turned on
2) When the lamp is turned on during driving