Repair Procedures

Replacement

CAUTION:
- Avoid suffering excessive impact.
- Do not entering the water into pin inside.
- Take care not to be damaged height sensor witch is beakable.

1. Removal front wheel & tire.

Tightening torque:
88.3 - 107.9N.m (9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)

2. Loosen the bolt and then remove the height sensor (A).




3. Remove the connector & bolt.








4. Installation is the reverse of removal.

Height sensor calibration
1. Connect to the GDS connector.