Repair Procedures

Replacement

CAUTION:
- Avoid suffering excessive impact.
- Do not entering the water into pin inside.
- Do not remove cap except assemble and disassemble.
- Do not pile up the parts.
- Air tube marking takes care not to be came off.
- Take care not to twisted.

1. Removal the front bumper.

2. Removal the right head light.

3. Disconnect the connector (A).




4. Disconnect the air tube.





NOTE:
- Remove the air fully with enough interval of time and separate completely.

5. Loosen the bolt by then remove the solenoid valve (A).








6. Installation is the reverse of removal.