Scantool Diagnostics

AFLS(LED)
B1661 Parameter Fault And Missing - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. Engine "ON"
3. Confirm the ECU type and then download to correct parameter.
* REFERENCE*
Perform the initializing after replace "Height sensor"
* Vehicle condition
(1) Park at lever land
(2) Vehicle speed ≤ 5km/h
(3) Engine r.p.m > 500rpm
(4) Connect GDS.
(5) CAN communication is normal status
(6) Battery voltage > 10.5V
(7) Headlamp S/W ON, AFLS ON
1 Parameter Download




























2 Calibration








3 Clear "DTC"
4 Confirm the Headlamp movement through the Actuation Test




Fig.1) Select the Parameter Download
Fig.2) Parameter Download
Fig.3) Parameter Download - Non Air Suspension 1st
Fig.4) Parameter Download - Non Air Suspension 2nd
Fig.5) Parameter Download - Air Suspension 1st
Fig.6) Parameter Download - Air Suspension 2nd
Fig.7) Parameter Download - Air Suspension 2nd
Fig.8) Select the Calibration
Fig.9) Calibration
Fig.10) Actuation Test
5 Confirm the "DTC" and "Service data"
4. Is parameter displayed within specifications?