Component Inspection

Steering Column Module
B1959 Tilt Position Sensor Error - Inspection/Repair:_:Component Inspection

Component Inspection

Check tilt motor
1. Connect scantool
2. IG "ON" & ENG "OFF"
3. Select "Actuation Test" mode.
4. Execute "Tilt Steering Column (UP, DOWN)" test.

Specification :Turned to pressed direction




5. Is motor working normal ?





Check switch
1. IG "ON" & ENG "OFF"
2. After connect GDS, select "Current Date" menu.
3. Check whether "Tilt (UP,DOWN) Switch" is turned to "ON" when the control switch is pressed. (UP, DOWN)

Specification :Service data is switched. (ON <-> OFF)




4. Is the service data normal?