Scantool Diagnostics

AFLS(LED)
B2200 LIN communication error DBL(Dynamic Bending Light) Right - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to data link connector(DLC).
2. Engine "ON".
3. Monitor the "Main function activation status, HLL position, DBL position" parameter on the GDS.
4. Check the operation of "HLL position and DBL position" use Actuation test.








Fig.1) Actuation Test - DBL RIGHT POSTION
Fig.2) Actuation Test - DBL LEFT POSTION
5. Is parameter displayed within specifications ?