Scantool Diagnostics

Automatic Transaxle
P0741 Torque Converter Clutch Circuit Performance or Stuck Off - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. Ignition "ON" & Engine "ON".
3. Driving 1st speed to 8th speed at D-range.
4. Selet "Currnet Data"mode and monitor "Torque converter clutch" parameter.

Specification :Torque converter slip > 100rpm








































Fig 1) "P" range
Fig 2) "R" range
Fig 3) "D" range 1st gear
Fig 4) "D" range 2nd gear
Fig 5) "D" range 3rd gear
Fig 6) "D" range 4th gear
Fig 7) "D" range 5th gear
Fig 8) "D" range 6th gear
Fig 9) "D" range 7th gear
Fig 10) "D" range 8th gear
5. Is Torque conveter clutch value within specification?