A/V Jack

Removal

1. Remove the floor console (A).




2. Disconnect the jack assembly connector from the floor console.
3. Remove the Multi media Jack (A) from the floor console.






Installation

1. Install the Multi media Jack.
2. Connect the Multi Media Jack connector.
3. Install the under cover to the floor console.

Inspection

1. Disconnect the negative(-) battery terminal.
2. Disconnect the Multi Media Jack connector after from the floor console.




3. To inspect USB/IPOD port, check the voltage between NO.1 and 4 terminal of.

Standard value:5V

4. To inspect AUJack, check the voltage between NO.14 terminal of Jack output connector and NO.4 terminal of USB/IPOD input port at AUX input.

Standard value:5V