Crankshaft Main Bearing: Specifications

Main Bearing

Install the main bearing cap bolts.
Install and uniformly tighten the bearing cap bolts, in several passes, in the sequence shown.

Tightening torque
Main bearing cap bolt
49.0N.m (5.0 kgf.m, 36.2lb-ft) + 90° (1 - 8)
19.6N.m (2.0 kgf.m, 14.5lb-ft) + 120° (9 - 16)
29.4 - 31.4N.m (3.0 - 3.2 kgf.m, 21.7 - 23.1lb-ft) (17 - 24)

NOTE:
- Always use new main bearing cap bolts.
- If any of the bearing cap bolts are broken or deformed, replace it.






Crankshaft







Place Of Identification Mark (Connecting Rod Bearing)