Rear Lower Arm

Replacement

1. Remove the rear wheel & tire.

Tightening torque:
90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)

2. Disconnect the rear height sensor & stabilizer link with the lower arm.

Tightening torque
Height sensor : 4 - 6N.m (0.4 - 0.6kgf.m, 3 - 4lb-ft)
Stabilizer link : 50 - 65N.m (5.0 - 6.5kgf.m, 36 - 47lb-ft)








3. Loosen the bolt (A), nuts (B), flange bolt (C), lock nuts (D).

Tightening torque
Axle : 140 - 160N.m (14.0 - 16.0kgf.m, 101 - 116lb-ft)
Damper : 100 - 120N.m (10.0 - 12.0kgf.m, 72 - 87lb-ft)




4. Installation is the reverse of removal.
5. Check the alignment.


Inspection

1. Check the bushing for wear and deterioration.
2. Check the rear lower arm deformation.
3. Check the all bolts.
4. Check the coil spring pad for deterioration and deformation.