Scantool Diagnostics

Electronic Stability Control
C1235 Primary Pressure Sensor-Electrical - Scantool Diagnostics:_:Monitor Scantool Data

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. IG "ON" & ENG "ON".
3. Press the brake pedal.
4. Monitor the "Pressure Sensor" parameter on the GDS.

Specification :Approx. 60bar ~150bar (There is difference in displayed parameter according to braking force)




Fig 1) Normal data at pressing the brake pedal(There is difference in displayed parameter according to braking force)
5. Whenever brake pedal is pushed down, is the pressure sensor's GDS data changed?