Monitor Actuation Test

Electronic Stability Control
C2366 TC Valve Primary (USV1) Error - Scantool Diagnostics:_:Monitor Actuation Test

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC)
2. IG "ON".
3. Select the "Actuation Test" mode on the GDS.
4. Inspect opearating status of TCS(USV) valve #1 with Actuation Test.

Specification :It's normal if operating sound is heard.




Fig.1) Test Condition : Ignition "ON".
5. Does a TCS(USV) valve #1 operate normally?