Repair Procedures

Replacement

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not bend or scratch the cover and other parts.

1. Remove the mounting clips.




2. Remove the radiator upper cover mounting clips.




3. After loosening the front bumper side's mounting screw, then disconnect the side's.




4. Remove the front bumper after pull out the front bumper.

CAUTION:
- When you pull out the front bumper, the font bumper could be damaged by the projection (A).




5. Disconnect the connector (A).




6. Installation is the reverse of removal.