General Information

Telematics Unit
B1690 Network Fail (Hi-CAN) - General Information

Component Location





General Description

The CAN Communication consists of a twisted pair of network wires. One CAN low line and one CAN high line. The CAN lines pass through the EMS, MDPS, FATC, ABS, etc. modules. This allows the TMU to communicate with each module. TMU gathers DTC from ECUs for diagnostics service, vehicle speed through, AVN TMU SW upgrage through HI-CAN.

DTC Description

The TMU sets B1690 when CAN line is in the below status.
- Short to Ground
- Short to Battery

DTC Detecting Condition





Diagnostic Circuit Diagram





Signal Waveform & Data