Repair Procedures

Removal

NOTE:
- Take care not to scratch the center fascia panel and related parts.
- Eject all the disc before removing the audio unit to prevent damaging the CD player's load mechanism.

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad garnish (A).




3. Remove the crash pad center fascia panel (A), after loosening the mounting screws.




4. Disconnect the center fascia panel connectors (B), after removing the air condition hose (A) from the upper side of center fascia panel.




5. Remove the audio head unit mounting screws, connectors and cables (A).





NOTE:
If the CD does not eject, do not attempt to remove it because the audio unit may be damaged.Contact an authorized Hyundai dealership for assistance.

Installation

1. Connect the audio unit connectors and cables.
2. Install the audio unit.
3. Install the crash pad center fascia panel.
4. Install the crash pad garnish.
5. Check the audio system.

NOTE:
Make sure the audio head unit connectors are plugged in properly and the antenna cable is connected properly.