Scantool Diagnostics

Tire Pressure Monitoring
C1314 Sensor 3 Radio Frequency Channel Failure - Scantool Diagnostics

Monitor GDS Data

** In a case that there are any other DTCs except for C1314 at self-diagnosing, first repair the problems related to those DTCs and then see if C1314 happens again.
1. Connect GDS to Data Link Connector.
2. IG KEY ON.
3. Select Sensor status in "Vehicle S/W Management".
4. Postion the GDS TPMS as near as possible to the tire.
5. Check a sensor's ID out of sensor's information.
(Reading may take 30 - 60 seconds depending on the sensor's characteristics. )

Measuring method : Refer to No.1 Measurement








Fig.1) A method of checking a sensor ID with TPMS Exciter
Fig.2) Data displayed by TPMS Exciter
6. Is the data of sensor normal ?