Scantool Diagnostics

Automatic Transaxle(DCT)
P074A Unable to Engage Gear2 - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. Ignition "ON", Engine "OFF".
3. Erase the "DTC code" use GDS.
4. Perform "DCT Manual Learning" use GDS.




FIG1) DCT Manual Learning - Warning




FIG2) DCT Manual Learning - Step 1




FIG3) DCT Manual Learning - Step 2




FIG4) DCT Manual Learning - Step 3
5. Does "DCT Manual Learning" performed normally?