Scantool Diagnostics

Automatic Transaxle(DCT)
P0906 Gate Select Position Circuit Low - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. Engine "ON".
3. Monitor the "Select Motor Voltage" parameter on the scantool.
4. Move selector lever from "P" range to "D" range. And Driving at 1st gear to 6th gear.

Specification : Increase or decrease as driving condition.




FIG1)"P" & "D" range.




FIG2)"R" range.




FIG3) 1st gear




FIG4) 2nd gear




FIG5) 3rd gear




FIG6) 4th gear




FIG7) 5th gear




FIG8) 6th gear
5. Does "Select Motor Voltage" follow the referance data?