Scantool Diagnostics

Automatic Transaxle(DCT)
U1103 Lost Communication With TGS Lever - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to Data Link Connector(DLC).
2. Ignition "ON" & Engine "ON".
3. Monitor the "TGS sensor" parameter on the scantool.
4. Move selector lever from "P" range to "D" range.




FIG1) "P" Range




FIG2) "R" Range




FIG3) "D" Range
5. Does "TGS sensor" follow the referance data?