Repair Procedures

Replacement

1. Remove the rear wheel & tire.

Tightening torque :
88.3 - 107.9N.m(9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
Be careful not to damage to the hub bolts when removing the rear wheel & tire.

2. Remove the parking brake bracket (A).

Tightening torque :
9.8 - 13.7N.m (1.0 - 1.4kgf.m, 7.2 - 10.1lb-ft)




3. Loosen the bolt and then remove the wheel speed sensor cable (A) from the torsion beam axle.

Tightening torque :
6.9 - 10.8N.m(0.7 - 1.1kgf.m, 5.1 - 8.0lb-ft)




4. Remove the brake caliper assembly (A) from the torsion beam axle by loosening the bolts.

Tightening torque :
63.7 - 73.5N.m(6.5 - 7.5kgf.m, 47.0 - 54.2lb-ft)




5. Loosen the bolt & nut and then remove the rear shock absorber (A) from the torsion beam axle (B).

Tightening torque :
98.1 - 117.7N.m (10.0 - 12.0kgf.m, 72.3 - 86.8lb-ft)




6. Remove the torsion beam axle (A) from the body loosening the bolts.

Tightening torque :
137.3 - 156.9N.m (14.0 - 16.0kgf.m, 101.3 - 115.7lb-ft)




7. Remove the rear hub assembly.

8. Installation is the reverse of removal.