Repair Procedures

Removal

1. Disconnect the negative (-) battery terminal.
2. Open the tailgate and remove the tailgate trim.

3. Disconnect the back view camera connector (A).




4. Remove the back view camera wiring fix clip (A) and the remove 4 nuts.




5. Remove the back view camera (A).






Installation

1. Install the back view camera.

CAUTION:
When installing a back view camera, be sure that the wire (A) does not get caught in or be pressed under the camera.
The lead wire must be fixed to the camera. Check the condition of the wiring fix clip (B).




2. Fix the back view camera wiring clip and connect the connector.
3. Install the tailgate trim.