Entertainment Systems: Service and Repair

Removal

AVN Head Unit

NOTE:
- Take care not to scratch the center fascia panel and related parts.
- Eject all the disc before removing the AVN head unit to prevent damaging the CD player's load mechanism.

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad garnish (A).




3. Remove the heater and A/C controller (A) after loosening 4 screws.




4. Disconnect the heater and A/C controller connector (A).




5. Remove the ANV head unit (A) after loosening 4 screws.




6. Remove the AVN head unit connectors and cables (A).





NOTE:
- If CD does not eject, don't try to remove it.
- The player may be damaged.
- Therefore, contact a service shop for repairs.

Installation

1. Connect the AVN head unit connectors and cables.
2. Install the AVN head unit.
3. Install the heater & A/C controller after connecting the connector.
4. Install the crash pad garnish.
5. Connect the negative (-) battery terminal.

NOTE:
Make sure the AVN Head unit connectors are plugged in properly and the antenna cable is connected properly.