Repair procedures

Replacement

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Using a screwdriver or remover, remove the front door scuff trim (A).
[Front]




2. Remove the rear seat cushion.

3. After loosening the mounting screws, then remove the rear door scuff trim (A).
[Rear]




4. Install in the reverse order of removal.

CAUTION:
- Make sure the connector are connected in properly.
- Replace any damaged clips.