Center Pillar Trim

Replacement

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the front door scuff trim.

2. Remove the rear door scuff trim.

3. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
4. The seat belt anchor pretensioner (A) be removed after pushing the lock pin (B) as arrow direction.




5. Remove the center pillar lower trim (A).




6. Remove the cap (B).
7. After loosening the mounting bolt, then remove the center pillar upper trim (A).




8. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.