Repair procedures

Replacement

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the rear wheel house trim.

2. Remove the luggage tray covering trim (A).
[Lower]




[Upper]




3. Remove the luggage center tray trim (A).




4. After loosening the mounting screws, then remove the luggage tray side trim (A).




5. Remove the rear transverse trim.

6. Using a screwdriver or remover, remove the luggage lamp (A).
7. Disconnect the luggage lamp connector (B).




8. After loosening the mounting clips and screw, then remove the luggage side trim (A).




9. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.