Repair procedures

Replacement

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the front seat shield inner cover.

2. Remove the front seat shield outer cover.

3. Remove the front seat lower protector (A).




4. Disconnect the front seat heater connectors (A).




5. Push the protector(A), and then front seat cushion cover (C) from the front seat frame (B).




6. Remove the front seat cushion cover (A) from the front seat frame.




7. After removing the velcro tape (B) on the front of seat cushion and remove the front seat cushion cover (A).




8. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.
- Make sure the connector is plugged in properly.