Repair procedures

Replacement

[LH]

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the rear seat back cover [LH].

2. After loosening the mounting bolts, then remove the rear seat latch (A).
3. Remove the rear seat latch rod (B) to direction of the arrow.

Tightening torque :
16.7 - 25.5 N.m (1.7 - 2.6 kgf.m, 12.3 - 18.8 lb-ft)




4. Install in the reverse order of removal.

CAUTION:
- Replace any damage clips.

[RH]

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the rear seat back cover [RH].

2. After loosening the mounting bolts, then remove the rear seat latch (A).
3. Remove the rear seat latch rod (B) to direction of the arrow.

Tightening torque :
16.7 - 25.5 N.m (1.7 - 2.6 kgf.m, 12.3 - 18.8 lb-ft)




4. Install in the reverse order of removal.

CAUTION:
- Replace any damage clips.