Repair procedures

Replacement

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the front seat assembly.

2. Remove the front seat shield outer cover.

3. After loosening the mounting screws, then remove the front seat cushion track cover (A).




4. After loosening the mounting bolts, then remove the front seat cushion track (A).

Tightening torque :
44.1 - 53.9 N.m (4.5 - 5.5 kgf.m, 32.5 - 39.8 lb-ft)




5. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.
- Make sure the connector is plugged in properly.