Repair procedures

Replacement

CAUTION:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

NOTE:
- Take care not to scratch the body surface.

1. Using a screwdriver or remover, remove the crash pad side cover [RH] (A).




2. Disconnect the stopper (B) from the glove box (A).




3. Disconnect the air damper (A) from the glove box (B).




4. Disconnect the pins (A) and then remove the glove box (B).




5. After loosening the mounting screw, then remove the crash pad passenger's panel (A).




6. After loosening the mounting screws and bolts, then remove the glove box housing (A).




7. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.