Front Fog Lamps

Inspection

1. Disconnect the negative(-) battery terminal.
2. Remove the lighting switch of the multifunction switch.

3. With the front fog lamp switch, make sure that continuity exists between the terminals below.
If continuity is not as specified, replace the multi-function switch.





Front Fog Lamp






Removal

1. Disconnect the negative(-) battery terminal.
2. Remove the front bumper cover.

3. Remove the front fog lamp connector (A) from the front bumper.

[LH]





[RH]




4. Disconnect the connector (A).




5. Remove the front fog bulb (A) after turning it in the counterclockwise direction.




6. Remove the front fog lamp assembly (A) after loosening 4 screws.






Installation

1. Install the front fog bulb and connect the connect.
2. Install the front fog lamp assembly.
3. Install the front bumper cover.