Rear Fog Lamps

Inspection

Multifunction Switch(Lighting)
1. Disconnect the negative (-) battery terminal.
2. Remove the lighting switch of the multifunction switch.

3. With the rear fog lamp switch, make sure that continuity exists between the terminals below.
If continuity is not as specified, replace the multifunction switch.




Rear Fog Lamp




Front & Rear Fog Lamp






Removal

Rear fog lamp assembly
1. Disconnect the negative(-) battery terminal.
2. Remove the rear bumper cover.

3. Disconnect the connector (A)




4. Remove the rear fog lamp assembly (A).





Rear fog lamp bulb
1. Remove the rear under cover.
2. Remove rear wheel guard after removing the tire.
3. Remove the rear fog lamp bulb (A) turning it in the counterclockwise direction.






Installation

1. Install the rear fog bulb and connect the connector.
2. Install the rear fog lamp assembly.
3. Install the rear bumper cover.