Tail Lamp: Service and Repair

Removal

Rear Combination lamp (Inside)
1. Disconnect the negative (-) battery terminal.
2. Remove the rear combination lamp cover (A).




3. Remove the mounting nuts (4EA).




4. Remove the rear combination lamp (B) after disconnecting the connector (A).








5. Remove the stop lamp (A) and the tail lamp (B).









Rear Combination Lamp (Outside)
1. Disconnect the negative (-) battery terminal.
2. Remove the rear lamp assembly (A) after removing the bolts (2EA) and connector (B).








3. Replace tail / stop lamp bulb (A) and turn signal lamp bulb (B) turning it the counterclockwise direction.






Installation

1. Install the rear combination lamp (Inside) assembly.
2. Install the rear combination lamp (outside) assembly.