Repair Procedures

Removal and Installation

1. Remove the engine cover.
2. Disconnect the battery negative terminal.
3. Remove the air duct (A).
4. Disconnect the breather hose (B).
5. Disconnect the intake hose (C) and air cleaner assembly (D).

Tightening torque
Hose clamp :
2.9 - 4.9N.m (0.3 - 0.5kgf.m, 2.2 - 3.6lb-ft)
Air cleaner bolts :
3.9 - 5.9N.m (0.4 - 0.6kgf.m, 2.9 - 4.3lb-ft)





NOTE:
Install the air intake hose while the center of the mark of hose must be in line with the throttle body rib.




6. Install in the reverse order of removal.