Repair procedures

Replacement

1. Remove the front seat assembly.

2. After loosening the mounting screws, then remove the front seat cushion track cover (A).




3. Disconnect the front seat belt buckle connector wiring (A).




4. After loosening the mounting bolt, then remove the front seat belt buckle (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




5. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.
- Make sure the connector is plugged in properly.