Repair Procedures

Removal

1. Remove the floor console.

2. Disconnect the connector (A).




3. Disconnect the shift control cable (A).




4. Remove the AT lever(shift lever) assembly (A) by removing the bolts (4ea).

Tightening torque:
8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb-ft)




5. Installation is the reverse of removal.

NOTE:
Make sure vehicle does not roll before setting room side shift lever and Automatic Transaxle(AT) side.