Repair Procedures

Removal

Front Blind Camera
1. Remove the front bumper cover.
2. Remove the front blind camera (B) after removing the connector (A) and screws (4EA).









Back View Camera
1. Remove the screws, clip and trunk lid trim in the trunk.
2. Remove the trunk lid panel.
3. Remove the back view camera (B) after removing the connector (A) and screws (2EA).









Front Back View Camera Unit
1. Disconnect the negative (-) battery terminal.
2. Remove glove box housing (A).




3. Disconnect the glove box housing connector (A).




4. Remove the DIS head unit.
5. Remove the USB interface unit.
6. Remove the front back view camera unit (A) after removing the nuts (2EA) and connector.






Installation

Front blind camera
1. Install the front blind camera.
2. Install the front bumper cover.

Back view camera
1. Install the back view camera.
2. Install the trunk lid panel and trim.

Front Back view camera unit
1. Install the front back view camera unit.
2. Install the USB interface unit
3. Install the DIS head unit.
4. Install the glove box and housing.