Repair Procedures

Replacement

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not bend or scratch the cover and other parts.

1. Remove the mounting clips.




2. Remove the radiator upper cover (A).




3. Loosen the front bumper side mounting screw.




4. Disconnect the fog lamp connector (A).




5. Disconnect the front bumper main connector (A).




6. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.